Metal Roofing Maintenance & Care Tips

Metallic roofing is a rewarding investment that is included with a slew of benefits. Preserving a metal roof is extremely simple compared to maintaining other roofing types, like asphalt shingles, but that doesn’t signify regular maintenance isn’t required.

Here are some methods for you to look after your metal roofing to help it last an eternity:

Safety Tricks for Maintaining a Metal Roof

If you’re uncomfortable scaling your ladder or walking on your roofing, don’t attempt a roof inspection. Your security is of the most importance, so you’re better off dialling a roofing professional you can trust to handle the work for you. Don’t put yourself vulnerable unnecessarily.

If you are an experienced handyman and feel you’re prepared to tackle the work, be sure to review and follow this checklist of safety requirements when attempting any metallic roof covering maintenance, especially position seam metal roofing maintenance:

  • Use OSHA-approved show up protection.
  • Wear soft-soled shoes. Avoid putting on black-soled shoes since the marks they leave on your material roof’s surface can be difficult to eliminate, making maintenance over a metal roof even more difficult.
  • Minimize feet traffic. Don’t walk on the rake flashings, gutters, any skylight or fiberglass -panel, or hip or ridge flashings. Only walk on toned regions of the material roof panel and near works with to avoid slips.

Once all safety requirements have been addressed, here are tips for proper maintenance of your material roof:

Metal Roof covering Maintenance Tasks

  1. Thoroughly Clean the Gutters

This consists of downspouts and drain boxes. Leaves, mud, twigs and other debris can build-up and clog your gutter system, leading it to overflow, leak, and cause other harm to your home’s roof, siding, and foundation. It’s recommended to clean out your gutters at least two times per year-more frequently if you are in a windy area where leaves and debris can accumulate at a faster rate.

  1. Lean Away Tree Branches

Any branches that extend over or touch your roof should be trimmed. Stormy weather can cause heavy tree limbs to land and scratch or dent your roofing. If you notice any signals of roofing damage after inspecting your roofing, contact a roof covering professional immediately to ensure there are no root issues that have to be addressed. Find out more about metal roofing here,

  1. Look for Roof Penetration

Cracks, seams or penetrations in your material roof allow normal water to leak through into the roofing system, creating a host for water damage to spread. Steel roof top leaks are unusual, but may appear around air vents and skylights. Aging and severe weather events can cause silicone seals to split and warp, which can lead to leaks over time. Make sure to fill any identifiable breaks with a versatile metal roofing sealant.

  1. Look for Loose or Ruined Roof Parts

This includes loose flashings, roof sheets, fasteners, ridge caps, closures or venting materials, plus more. If you’re unsure what you need to consider, call in a roofing professional you trust to help you identify any issues.

  1. Inspect for Corrosion

Search around for the chimney, heating system and air vents, ac units and any petrol condensers above cooking areas. Many of these areas commonly release steam, heating and chemicals that can break down the color on your metal roof and lead to corrosion.

  1. Clear Waterways

Any even area on your roofing may become a pooling area. As eaves, sticks and other debris collect on your roofing, water is unable to properly elope and drain from the roof. This may cause mold, rust or other rot to consume through your roof and ruin it.